Raspberry Pi PoE+ Injector
Single-port 30W PoE+ injector for IEEE 802.3af and 802.3at devices, including every Raspberry Pi PoE HAT.
Back in stock soon
Power-over-Ethernet-Plus add-on for Raspberry Pi 4 and 3B+, with a cooling fan. Needs PoE+ power-sourcing equipment.
Temporarily out of stock · back soonThe Raspberry Pi PoE+ HAT powers your Raspberry Pi through its Ethernet cable from a PoE+ switch or injector, so one cable carries both data and power. It works with Raspberry Pi 4 and Raspberry Pi 3 Model B+.
A 25mm brushless fan keeps the processor cool. Power-sourcing equipment is required, such as the Raspberry Pi PoE+ Injector.
| Standard | IEEE 802.3at-2009 PoE |
|---|---|
| Input voltage | 37-57 V DC, Class 4 device |
| Output power | 5 V DC/4 A |
| Cooling | 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling |
| Features | fully isolated switched-mode power supply; fan control |
| Operating temperature | 0 °C to +50 °C |
| Feature | Installation |
| Ethernet | Connecting your PoE+ HAT to your Raspberry Pi |
| Ethernet | Before installing the PoE+ HAT, you must attach the supplied spacers in the four corners of the board |
| Ethernet | Then connect the Raspberry Pi PoE+ HAT to the two 0.1" headers (40 + 4) that are fitted on your Raspberry Pi |
| Ethernet | Once the PoE+ HAT board is connected, you can power your Raspberry Pi through its RJ45 network connector |
| Ethernet | Disconnecting your PoE+ HAT |
| Feature | Take care when separating the HAT from your Raspberry Pi |
| Feature | Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other |
| Feature | Safety instructions |
| Feature | Additional information |
| Production lifetime | Until at least January 2030 |
| Manufacturer | Raspberry Pi |
| Hossam UK code | HUK-80968 |
| Standard UK delivery | £3.95, free on orders over £100. Delivered in 2–3 working days. |
|---|---|
| Next working day | £6.95. Order by 2pm, Monday to Friday. |
| Returns | Return unopened items within 14 days for a full refund. Faulty items are covered by the manufacturer’s warranty. |
| WEEE | We offer free take-back of old electrical equipment when you buy a similar item. |
Single-port 30W PoE+ injector for IEEE 802.3af and 802.3at devices, including every Raspberry Pi PoE HAT.
Back in stock soonAdd-on board with a built-in Hailo AI accelerator for Raspberry Pi 5, at 13 or 26 TOPS.
Back in stock soonHailo-10H AI accelerator with 8GB of on-board RAM that brings generative AI, LLMs and VLMs to Raspberry Pi 5.
Back in stock soonConnect M.2 NVMe SSDs and AI accelerators to Raspberry Pi 5's PCIe 2.0 interface, in standard or compact size.
Back in stock soon