Arduino MKR CAN Shield
Connect MKR boards to a CAN bus with the Microchip MCP2515 controller and NXP TJA1049 transceiver.
Back in stock soon
Use UNO-format shields with an MKR board.
Temporarily out of stock · back soonThe MKR2UNO Adapter turns an UNO-format project into an MKR-based one with little effort, so you can upgrade to a more powerful board with an integrated Li-Po charger. Arduino notes that it is currently compatible only with the MKR1000 without headers.
| Operating Voltage | 3.3V |
|---|---|
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limit) | 6-16V |
| Analog Input Pins | 6 |
| Analog Output Pins | 1 |
| Digital I/O Pins | 14 |
| DC Current for 3.3V Pin | 700 mA |
| DC Current for 5V Pin | 700 mA |
| Length | 68.6 mm |
| Width | 53.4 mm |
| Weight | 24 g |
| Manufacturer | Arduino |
| Manufacturer part no. | TSX00005 |
| Hossam UK code | HUK-58250 |
| Standard UK delivery | £3.95, free on orders over £100. Delivered in 2–3 working days. |
|---|---|
| Next working day | £6.95. Order by 2pm, Monday to Friday. |
| Returns | Return unopened items within 14 days for a full refund. Faulty items are covered by the manufacturer’s warranty. |
| WEEE | We offer free take-back of old electrical equipment when you buy a similar item. |
Connect MKR boards to a CAN bus with the Microchip MCP2515 controller and NXP TJA1049 transceiver.
Back in stock soonu-blox SAM-M8Q GNSS receiver for MKR boards, also usable with other boards through its Eslov connector.
Back in stock soonBosch BNO055 absolute orientation sensor for MKR boards: accelerometer, gyroscope and magnetometer with fusion.
Back in stock soonAdds 2MB of SPI flash and a microSD slot to MKR boards, for storing data to analyse later.
Back in stock soon