Arduino MKR WiFi 1010
MKR board with a SAMD21, u-blox NINA-W102 Wi-Fi and Bluetooth LE, a crypto chip and a Li-Po battery charger.
Back in stock soon
SAMD21 board in the MKR format with an on-board microSD slot and I2S bus, for sound, music and data logging.
Temporarily out of stock · back soonArduino MKR Zero brings the power of the Zero to the smaller MKR form factor. Its SAMD21 Cortex-M0+ microcontroller pairs with an on-board microSD connector on a dedicated SPI interface and an I2S bus, so you can play and record audio files with no extra hardware.
It is a great tool for learning 32-bit development and can run from a single-cell Li-Po battery.
| Microcontroller | SAMD21 Cortex-M0+ 32bit low power ARM® MCU |
|---|---|
| Board Power Supply (USB/VIN) | 5V |
| Supported Battery(*) | Li-Po single cell, 3.7V, 700mAh minimum |
| DC Current for 3.3V Pin | 600mA |
| DC Current for 5V Pin | 600mA |
| Circuit Operating Voltage | 3.3V |
| Digital I/O Pins | 22 |
| PWM Pins | 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19) |
| UART | 1 |
| SPI | 1 |
| I2C | 1 |
| Analog Input Pins | 7 (ADC 8/10/12 bit) |
| Analog Output Pins | 1 (DAC 10 bit) |
| External Interrupts | 10 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17) |
| DC Current per I/O Pin | 7 mA |
| Flash Memory | 256 KB |
| Flash Memory for Bootloader | 8 KB |
| SRAM | 32 KB |
| EEPROM | no |
| Clock Speed | 32.768 kHz (RTC), 48 MHz |
| LED_BUILTIN | 32 |
| Manufacturer | Arduino |
| Manufacturer part no. | ABX00012 |
| Hossam UK code | HUK-47306 |
| Standard UK delivery | £3.95, free on orders over £100. Delivered in 2–3 working days. |
|---|---|
| Next working day | £6.95. Order by 2pm, Monday to Friday. |
| Returns | Return unopened items within 14 days for a full refund. Faulty items are covered by the manufacturer’s warranty. |
| WEEE | We offer free take-back of old electrical equipment when you buy a similar item. |
MKR board with a SAMD21, u-blox NINA-W102 Wi-Fi and Bluetooth LE, a crypto chip and a Li-Po battery charger.
Back in stock soonThe classic Arduino board: ATmega328P at 16MHz with 14 digital I/O pins, 6 analogue inputs and USB-B, in a removable DIP package.
Back in stock soonArduino UNO R3 with a surface-mount ATmega328P, for builds where the microcontroller stays on the board.
Back in stock soonUNO-format board with an ATmega4809, a u-blox NINA-W102 radio for Wi-Fi and Bluetooth LE, an IMU and a crypto chip.
Back in stock soon