Arduino MKR CAN Shield
Connect MKR boards to a CAN bus with the Microchip MCP2515 controller and NXP TJA1049 transceiver.
Back in stock soon
Prototyping shield for MKR boards with a breakout for every pin and a 0.1-inch solder grid.
Temporarily out of stock · back soonThe MKR Proto Shield plugs onto an MKR board with its female/male headers and duplicates every pin, with plenty of solderable holes on a standard 0.1-inch (2.54mm) grid.
| Digital I/O Pins | 21 |
|---|---|
| PWM Digital I/O Pins | depending on the board |
| Analog Input Pins | 7 |
| Analog Output Pins | depending on the board |
| DC Current per I/O Pin | depending on the board |
| DC Current for 3.3V Pin | depending on the board |
| DC Current for 5V Pin | depending on the board |
| Lengtht | 61.5 mm |
| Width | 25 mm |
| Weight | 13 |
| Manufacturer | Arduino |
| Manufacturer part no. | TSX00001 |
| Hossam UK code | HUK-57847 |
| Standard UK delivery | £3.95, free on orders over £100. Delivered in 2–3 working days. |
|---|---|
| Next working day | £6.95. Order by 2pm, Monday to Friday. |
| Returns | Return unopened items within 14 days for a full refund. Faulty items are covered by the manufacturer’s warranty. |
| WEEE | We offer free take-back of old electrical equipment when you buy a similar item. |
Connect MKR boards to a CAN bus with the Microchip MCP2515 controller and NXP TJA1049 transceiver.
Back in stock soonu-blox SAM-M8Q GNSS receiver for MKR boards, also usable with other boards through its Eslov connector.
Back in stock soonBosch BNO055 absolute orientation sensor for MKR boards: accelerometer, gyroscope and magnetometer with fusion.
Back in stock soonAdds 2MB of SPI flash and a microSD slot to MKR boards, for storing data to analyse later.
Back in stock soon