Arduino MKR CAN Shield
Connect MKR boards to a CAN bus with the Microchip MCP2515 controller and NXP TJA1049 transceiver.
Back in stock soon
Larger MKR prototyping shield with more than 300 solder points and mounting holes.
Temporarily out of stock · back soonThe MKR Proto Large Shield fits onto an MKR board with its female/male headers and offers a larger prototyping area with more than 300 solder points. The silkscreen marks each MKR pin, and mounting holes let you fix it in place.
| Digital I/O Pins | 21 |
|---|---|
| PWM Digital I/O Pins | depending on the board |
| Analog Input Pins | 7 |
| Analog Output Pins | depending on the board |
| DC Current per I/O Pin | depending on the board |
| DC Current for 3.3V Pin | depending on the board |
| DC Current for 5V Pin | depending on the board |
| Lengtht | 80 mm |
| Width | 50 mm |
| Weight | 19 gr |
| Manufacturer | Arduino |
| Manufacturer part no. | TSX00002 |
| Hossam UK code | HUK-11338 |
| Standard UK delivery | £3.95, free on orders over £100. Delivered in 2–3 working days. |
|---|---|
| Next working day | £6.95. Order by 2pm, Monday to Friday. |
| Returns | Return unopened items within 14 days for a full refund. Faulty items are covered by the manufacturer’s warranty. |
| WEEE | We offer free take-back of old electrical equipment when you buy a similar item. |
Connect MKR boards to a CAN bus with the Microchip MCP2515 controller and NXP TJA1049 transceiver.
Back in stock soonu-blox SAM-M8Q GNSS receiver for MKR boards, also usable with other boards through its Eslov connector.
Back in stock soonBosch BNO055 absolute orientation sensor for MKR boards: accelerometer, gyroscope and magnetometer with fusion.
Back in stock soonAdds 2MB of SPI flash and a microSD slot to MKR boards, for storing data to analyse later.
Back in stock soon